Axle Steering Knuckles as “power joint” of the Bogie System

Introduction of Axle Steering Knuckles

In the field of modern rail transit equipment manufacturing, 台車, as the core components that support train operation, have always been at the forefront of technological breakthroughs in the industry in terms of material engineering innovation. その中で, the axle steering knuckles, として “power joint” of the bogie system, undertakes multiple missions such as transmitting driving force, adjusting the steering Angle, and buffering dynamic loads.

Material Selection And Development of Axle Steering Knuckles

Materials research and development to follow focuses on learning performance, environmental adaptation, and technology features of 3 the coordinate system. The current mainstream of 42 crmo4 alloy structural steel is the choice under the system of typical products:

Mechanics index level: の引張強さ 900-1100 メガパスカル, yield strength of no less than 650 時速マイル, to ensure the maximum axle load of 30 tons of extreme conditions maintain structural integrity. Through computer-aided stress simulation, the fatigue life of this material under alternating loads reaches the level of 10^7 cycles.

Dimension of environmental considerations: after nitriding surface treatment, material surface hardness can reach HV700, cooperating with 0.3 mm depth of hardening layer;

In environmental dust, wear-resisting coefficient is 40% more than conventional materials. The specially proportioned Cr-Mo-V alloy system enables the components to maintain stable mechanical properties within the environmental window ranging from -40℃ to 120℃.

Technology Features of Axle Steering knuckles

Using the die forging forming process, the material under the 1150 ℃ heating temperature shows excellent liquidity and, with subsequent conditioning treatment, can achieve the overall hardness HRC28-32 with core toughness perfect balance. This gradient hardness distribution enables the component to simultaneously meet the requirements of surface wear resistance and overall impact resistance.

Function of Axle Steering Knuckles

In the practical operation of rail transit equipment, steering knuckle materials by micro structure control realize the three functions:

（1）Dynamic stress dissipation mechanism based on the theory of dislocation multiplication design of fine-grain strengthening structure, making the material under the wheel/rail impact, through the grain boundary sliding effectively disperse stress concentration. Experimental data show that the impact absorption energy of fine-grained steel treated by the controlled rolling and controlled cooling process reaches over 80J, それは 25% higher than that of the traditional process.

(2)Interface tribology optimization: the laser cladding technique was used to construct the gradient composite layer on the surface of the matrix-formed Cr3C2 cermet phase. This structure stabilizes the friction coefficient of the mating surface of the steering knuckle pin shaft within the range of 0.08-0.12. Combined with the solid lubricating film technology, the maintenance cycle is extended to 800,000 キロメートル.

(3)Environmental response intelligent protection: innovation research and development of nanometer composite coating system, it contains pH response type corrosion inhibitor microcapsules. When the environmental humidity exceeds the threshold, the capsule automatically releases repair factors to form a self-repairing passivation film on the metal surface. Salt spray tests show that this technology extends the corrosion resistance life of components by more than three times.

Parameter of Axle Steering Knuckles

Package of Axle Steering Knuckles

ポリ袋+カートンボックス+木製ケース/パレット, 顧客の要求に応じて

会社概要

洛陽豊洋重工業株式会社, 株式会社. に設立されました 1998, 面積72,600㎡, 以上の 300 従業員, 32 技術者, 含む 5 シニアエンジニア, 11 アシスタントエンジニア, そして 16 技術者. 洛陽工程技術センターとして評価されています, 洛陽テクノロジーR&Dセンター, 国家ハイテク企業と何度も.
弊社の生産能力は 30,000 年間トン. 現在, 私たちは主に鋳鋼を生産しています, 鋳鉄 (ねずみ鉄, ダクタイル鋳鉄, 等), 完成品の加工と部品の組み立て。製品はロシアに輸出されています, 米国, ドイツ, アルゼンチン, 日本, フランス, 南アフリカ,イタリアとその他の国.

よくある質問

Q1: メーカーですか、それとも商社ですか?
あ:私たちはメーカーです. 当社は年に設立されました。 1998, 鋳造業界で約30年の実績, 総面積72,600㎡, 工場建屋面積51,000㎡.
第2四半期. 主な製品は何ですか?
あ: 当社は主に鋼鋳造に注力しています, 鉄鋳物, 完成品加工, および部品組立生産.
Q3: 鋳造部品をどの程度の精度で製造できるか?
あ: 当社はさまざまな鋳造プロセスで鋳造部品を製造する能力を持っています. 生産はISOに厳密に準拠しています 9001, ISO 14001 ISO45001、EN15085, 虹彩.
Q4. サンプル通りに生産してもらえますか?
 はい, あなたのサンプルまたは技術図面から生産できます. サンプルを入手した後、図面を作成することもできます.
Q5: 納品前の品質管理はどのように行っていますか?
あ: 品質検査は鋼鋳造部品の品質を保証する非常に重要な要素です. 私たちはフォローします 3 生産プロセス全体における検査回数. 材料試験レポートを提供します, 寸法試験レポート, 納品前に顧客に報告する機械的特性試験レポート.

何か商品にご興味がございましたら,お気軽にお問い合わせください.
接触:キャシー・シュー
電子メール:[email protected]
携帯:008615515321683