Railway Part Traction Motor End Cover for Rail Locomotives

Importance of Rail Locomotives Traction Motor End Cover

I Materials and Structural Design of Rail Locomotives Traction Motor End Cover

The motor end cover of the track locomotive, as a core protective component of the traction electrical system, integrates technologies from multiple disciplines such as mechanical engineering, materials science, and thermodynamics in its design. The main material is usually made of high-strength cast iron (HT250/HT300) or aviation-grade aluminum alloy (6061-T6), formed by a precision casting process, and the wall thickness tolerance is controlled within ±0.5mm. The composite end cover adopts a split structure design, including core functional areas such as the bearing chamber (tolerance grade IT6), labyrinth sealing groove (depth 8-12mm), and heat dissipation fins (spacing 5-8mm).

Ⅱ. Core Performance Features of Rail Locomotives Traction Motor End Cover

1.Mechanical performance: The static load capacity reaches 120kN, and the dynamic vibration tolerance frequency range is 0-2000Hz, meeting the vibration requirements of Class B of the third category in EN 61373 標準. The roundness error of the bearing housing is ≤0.02mm, and the surface roughness is Ra0.8μm.

2.Sealing performance: IP67 protection grade, capable of resisting the intrusion of solids with a diameter of 2.5mm, and short-term immersion depth of 1m. The sealing system includes three layers of protection: The main seal adopts fluoro rubber O-rings (hardness 70±5 Shore A), the secondary seal is a labyrinth non-contact structure, and the auxiliary seal is equipped with a magnetohy dynamic device.

3.Thermal management capability: The heat dissipation coefficient reaches 25W/m²· K. Through the coordinated operation of 72 radial heat dissipation fins (with a total heat dissipation area of 1.2m²) and the forced air cooling system, the temperature rise of the bearing can be controlled within ΔT≤45℃.

Ⅲ. Function Analysis of Rail Locomotives Traction Motor End Cover

1. Dynamic support system: Equipped with double-row tapered roller bearings (モデル 32218), the preload adjustment range is 0.05-0.15mm, and it is combined with the SKF grease lubrication system to achieve the automatic axial clearance compensation function.

2.Electromagnetic shielding design: The inner wall of the end cover is coated with a galvanized layer (50μm thick) combined with a conductive silicone gasket to form a continuous conductive path, which can attenuate electromagnetic interference (EMI) to below 30dBμV/m.

3. Fault Early Warning System: Integrating a temperature sensor (PT1000), a vibration accelerometer (±50g range), and a humidity detection module, it transmits status data in real time via CAN bus to achieve predictive maintenance.

Ⅳ. Application Scenarios of Rail Locomotives Traction Motor End Cover

1. Traction motor system: Suitable for permanent magnet synchronous motors (power class 1.5- 3MW), with a continuous operation life of up to 2 million kilometers in 350km/h high-speed EMUs. The specially designed air guiding structure can increase the flow rate of the cooling air to 25m/s.

2. Auxiliary power unit: When used in the compressor motor (power range 30- 150 kW), the sound insulation performance reaches 65dB(あ)@1m, effectively reducing the operating noise of the equipment.

3. Regenerative braking system: Under the braking energy recovery condition, the heat capacity design of the end cover can instantly absorb 150kJ of heat energy. When used in conjunction with phase change material (PCM), the temperature rise rate is reduced by 40%.

V. Evolution of Innovative Technologies の Rail Locomotives Traction Motor End Cover

Additive manufacturing technology: The titanium alloy end cover manufactured by the selective laser melting (SLM) process has a weight reduction of 35% and a fatigue life increase of 2.8 回. The internal flow channel optimization design has increased the cooling efficiency by 22%.

Intelligent monitoring system: Based on fiber Bragg grating sensing technology, it can monitor the stress distribution of the end cover structure in real time, with a sampling frequency of 10 kHz and a spatial resolution of 5mm, achieving micron-level deformation detection.

Composite protective coating: Plasma-sprayed Al2O3-TiO2 ceramic coating (200μm thick), combined with diamond-like carbon film (DLC), makes the surface hardness of the end cover reach HV1200, and the salt spray corrosion resistance time exceeds 3000 時間.

VI. Quality Control System of Rail Locomotives Traction Motor End Cover

1. The manufacturing process implements the TS 22163 railway industry standard. Key dimensions are fully inspected by a three-coordinate measuring machine (CMM), and the measurement uncertainty is ≤1.5μm.

Environmental simulation tests include:

4. Temperature shock test (-40℃↔+150℃, 100 cycles)

Sand and dust test (concentration 10g/m³, duration 8 時間)

Salt spray test (5% NaCl solution, period 720 時間)

The reliability verification adopts the accelerated life test (ALT), simulating an equivalent operating mileage of 5 百万キロメートル, with the target failure rate value ≤ 0.5 FIT.

2. This technical analysis indicates that the motor end cover of modern rail locomotives has evolved from a single protective component to an intelligent system integrating mechanics, electronics and thermal management. Its technical parameters are directly related to the energy efficiency ratio of the traction system (increased by 15-20%), maintenance cycle (extended to 1.2 百万キロメートル), and operational safety (failure rate reduced to 0.02 times per million kilometers). With the integrated application of new materials and Internet of Things (IoT) technology, the end cover system is developing towards functional modularization, status visualization, and intelligent maintenance, continuously promoting technological innovation in rail transit equipment.

パッケージ の Rail Locomotives Traction Motor End Cover

ポリ袋+カートンボックス+木製ケース/パレット, 顧客の要求に応じて

会社概要

洛陽豊洋重工業株式会社, 株式会社. に設立されました 1998, 面積72,600㎡, 以上の 300 従業員, 32 技術者, 含む 5 シニアエンジニア, 11 アシスタントエンジニア, そして 16 技術者. 洛陽工程技術センターとして評価されています, 洛陽テクノロジーR&Dセンター, 国家ハイテク企業と何度も.
弊社の生産能力は 30,000 年間トン. 現在, 私たちは主に鋳鋼を生産しています, 鋳鉄 (ねずみ鉄, ダクタイル鋳鉄, 等), 機関車の完成品加工および部品組立て,鉄道車両,高速鉄道, 鉱山機械,風力,etc.当社の製品はロシアに輸出されています, 米国, ドイツ, アルゼンチン, 日本, フランス, 南アフリカ,イタリアとその他の国.

よくある質問

Q1: メーカーですか、それとも商社ですか?
あ:当社はメーカーです。当社は年に設立されました。 1998, 鋳造業界で約30年の実績, 総面積72,600㎡, 工場建屋面積51,000㎡.
第2四半期. 主な製品は何ですか?
あ: 当社は主に鋼鋳造に注力しています, 鉄鋳物, 完成品加工, 機関車の部品組立生産,鉄道車両,高速鉄道, 鉱山機械,風力,等.
Q3: 鋳造部品をどの程度の精度で製造できるか?
あ: 当社はさまざまな鋳造プロセスで鋳造部品を製造する能力を持っています. 生産はISOに厳密に準拠しています 9001, ISO 14001 ISO45001、EN15085, 虹彩.
Q4. サンプル通りに生産してもらえますか?
 はい, あなたのサンプルまたは技術図面から生産できます. サンプルを入手した後、図面を作成することもできます.
Q5: 納品前の品質管理はどのように行っていますか?
あ: 品質検査は鋼鋳造部品の品質を保証する非常に重要な要素です. 私たちはフォローします 3 生産プロセス全体における検査回数. 材料試験レポートを提供します, 寸法試験レポート, 納品前に顧客に報告する機械的特性試験レポート.

何か商品にご興味がございましたら, お気軽にお問い合わせください.

電子メール:[email protected]
携帯:008615515321683