60Si2Mn is used for レールクリップ because it is a silicon-manganese spring steel with a high elastic limit and good fatigue resistance. 焼入れ焼戻し後, it forms a uniform tempered microstructure that lets the clip store clamping force as elastic deflection and hold it over millions of load cycles. The silicon and manganese in the grade work together to raise the elastic limit and resist stress relaxation, which is exactly what a spring clip needs to keep the rail pressed down over decades of service.

60Si2Mn elastic rail clip installed in a railway fastening system, showing the relationship between spring steel, heat treatment and elastic clamping force — 60Si2Mn spring steel combines heat treatment, high elastic limit and fatigue resistance to provide reliable clamping force for railway rail clips.

60Si2Mnがレールクリップに使用される理由: The Question Behind the Material

If you have ever looked at a rail clip specification and seen “60Si2Mn” written as the material, then seen a different drawing that says “38Si7” または “60Si2CrA”, you have asked the question this article answers. The clip looks the same. It does the same job. So why does the material designation matter?

一見して, the choice seems like a detail: steel is steel.

実際に, rail clip material is not quite that straightforward.

A rail clip is a spring. Its entire job is to be deflected during installation, store that deflection as clamping force, and keep pushing down on the rail foot for years without relaxing or cracking. Not every steel can do that. The material is chosen specifically for the way it behaves as a spring, and 60Si2Mn is one of the most widely used grades for that reason.

So what makes 60Si2Mn the right material for rail clips, and what should you check when it appears on a drawing? This guide answers why 60Si2Mn rail clips are so common, and what the grade name really promises.

What 60Si2Mn Rail Clips Are Made Of

60Si2Mn is a silicon-manganese spring steel, and it is the material behind most 60Si2Mn rail clips you will see in service. The name itself tells you the composition, in the Chinese designation system where the number is the carbon content and the letters are the alloying elements.

The grade name breaks down like this: の “60” refers to a nominal carbon content of 0.60%, の “Si2” indicates roughly 2% シリコン, そして “ん” indicates manganese. This is not a random combination. Carbon provides the strength, silicon improves the elastic behavior, and manganese improves hardenability and strength.

In international practice, 60Si2Mn corresponds roughly to SAE/AISI 9260, and similar grades appear in other designation systems under names such as 60Si7. The correspondence is close, but the exact composition limits and the applicable standard should be checked for each project, because the grade is defined by the standard that governs it.

The typical composition range for 60Si2Mn, as specified in the relevant spring steel standard, is roughly 0.56 に 0.64% 炭素, 1.50 に 2.00% シリコン, そして 0.60 に 0.90% マンガン, with limits on phosphorus and sulphur. The exact values depend on the standard edition and the metallurgical quality group, which is why the material should always be referenced to the standard and not just to the name.

For a clip that must survive millions of cycles, the composition is only the starting point. The heat treatment turns that composition into the spring.

Why Spring Steel, and Why Silicon and Manganese

The reason rail clips are made from spring steel, rather than ordinary structural steel, comes down to one property: the elastic limit. And the reason 60Si2Mn rail clips work so well is that this grade is engineered to raise exactly that property.

A spring stores energy by being deflected within its elastic range. When the load is removed, it returns to its original shape and releases the energy. A rail clip is installed by deflecting it, and that deflection is what produces the clamping force on the rail foot. The higher the elastic limit, the more the clip can be deflected and the more clamping force it can store without permanently deforming.

Ordinary steel yields too easily for this job. Under the repeated load of passing trains, it would gradually lose its shape and its clamping force. Spring steel is engineered to resist that.

Silicon and manganese each play a specific role:

シリコン. Silicon is the element that raises the elastic limit and improves resistance to stress relaxation. Stress relaxation is the gradual loss of clamping force over time as a spring stays deflected. For a rail clip that must hold its toe load for years, resistance to relaxation matters as much as initial strength.

マンガン. Manganese improves hardenability, which means the steel can be hardened more uniformly through the cross-section during heat treatment. It also contributes to strength.

一緒に, the carbon, silicon and manganese in 60Si2Mn give the steel a high elastic limit, good hardenability and adequate toughness for a spring component. That is the material side of the answer.

The other side is what happens in the furnace.

Diagram showing a railway elastic rail clip before and after deflection, demonstrating how elastic deformation creates stored energy and clamping force on the rail — A rail clip works by elastic deflection: when installed, the spring clip stores energy and continuously applies clamping force to hold the rail in position.

What Heat Treatment Does to the Clip

The composition of 60Si2Mn is only useful because it responds well to heat treatment. This is what turns the steel into the spring that makes 60Si2Mn rail clips reliable over their service life.

A rail clip is formed, then quenched and tempered. Quenching hardens the steel. Tempering relieves brittleness and produces the final microstructure that gives the clip its spring behavior. The result is a uniform tempered structure with a high elastic limit and enough toughness to avoid brittle fracture.

The heat treatment is not a detail to be assumed. The quenching temperature, the tempering temperature and the cooling control all affect the final properties. Two clips made from the same 60Si2Mn composition but heat-treated differently will not behave the same in service.

This is why the mechanical property requirements for spring steel are usually given together with the heat treatment condition. For 60Si2Mn, the achievable tensile strength depends on the tempering temperature: a lower tempering temperature gives higher strength and a higher one gives more toughness. The specification selects the balance the clip needs.

The practical point is that “60Si2Mn” on a drawing is shorthand. The full requirement is the grade plus the heat treatment plus the test requirements. A supplier quoting only the grade has not told you enough. If you are working through the wider maintenance picture, our guide to railway track maintenance shows where clip condition sits inside the full inspection cycle.

Why Not Just Any Strong Steel?

This is the question that gets at the heart of it. If 60Si2Mn is strong, why not use a higher-strength steel and get a stronger clip?

Because a rail clip is not chosen for strength alone. It is chosen for the combination of elastic limit, fatigue resistance and resistance to relaxation.

A very high-strength steel may have a high yield strength but poor resistance to stress relaxation, or it may be brittle and prone to sudden fracture under impact. A clip made from such steel could hold enormous clamping force initially and then lose it over time, or crack under a shock load.

The right spring steel balances the properties. It is strong enough to carry the load, elastic enough to store and return energy, tough enough not to fracture, and resistant enough to relaxation to hold its clamping force for years.

That balance is exactly what silicon-manganese spring steel is designed to provide, and exactly why 60Si2Mn rail clips have become a default choice across many fastening systems. This is also why two clips with the same geometry can behave very differently if they are made from different grades: the geometry determines the deflection, but the material determines what happens to the force over time.

High-strength elastic rail clip used in railway fastening systems to secure rails and maintain stable track performance — 鉄道締結システム用に製造された高強度レールクリップ, 信頼性の高いクランプ力と長寿命を実現.

How 60Si2Mn Rail Clips Compare to Other Steels

60Si2Mn is common, but it is not the only spring steel used for rail clips. The choice between grades usually comes down to the service conditions and the standard.

学年	Typical Role	Why It Is Chosen
60Si2Mn	General elastic clips, E-type and SKL designs	Balanced elastic limit, fatigue and availability
60Si2CrA	Higher-strength clips, 重量物用途	Chromium improves hardenability and fatigue
38Si7	Some SKL-type clips	Different alloying balance, commonly in European practice
55Si2Mn	Spring components with lower carbon	Slightly softer, where less strength is needed

This table is a simplified comparison, not a universal specification. The final material choice depends on the clip design, the toe load required, the standard that applies and the service conditions.

The important point is that these grades are alternatives, not upgrades in a simple ranking. A grade with more chromium or more carbon is not automatically better for every clip. It is chosen where the design or the standard calls for it.

If you are comparing clip types themselves, our guide toE-clip vs SKL clip covers the system differences, while this article focuses on the material they share or trade between.

What Should a Rail Clip Supplier Provide?

When buying rail clips, I would not stop at asking whether the material is 60Si2Mn. Ask what the material requirement actually includes.

信頼できるサプライヤーが提供できるはずです:

The material grade and the applicable standard (ギガバイト/トン 1222, SAE 9260, で 10089 or the project specification)
The chemical composition of the actual production heat
The heat treatment specification, including quenching and tempering conditions
Mechanical test results from the same heat
Hardness results where the standard requires them
Fatigue and clamping force test data with the test method identified
Coating and corrosion protection details
Traceability from heat to production batch to clip

大規模プロジェクトの場合, traceability matters most. If a batch of clips later shows relaxation or cracking, the ability to trace it back to the heat and the heat treatment records is what makes the investigation possible.

The material designation is a promise about how the clip will behave, and that promise is only as reliable as the heat treatment and inspection behind it. 私たちのガイド車輪の鉄道規格 explains the same principle for standards in general.

The Bottom Line on 60Si2Mn Rail Clips

60Si2Mn is used for rail clips because a rail clip is a spring, and silicon-manganese spring steel is engineered to be a spring: high elastic limit, 優れた耐疲労性, and resistance to stress relaxation over years of service. The composition sets the foundation, and the quenching and tempering turn it into the component that holds the rail down.

That is why I would not recommend choosing a rail clip based on the material grade alone. Start with the clip design and the toe load. 適用規格を確認する. Confirm the heat treatment and the test requirements. Then compare suppliers on the system behind the grade, not the grade name itself.

で洛陽豊洋重工業株式会社, 株式会社., 私たちは製造します弾性レールクリップ in 60Si2Mn and other spring steel grades, together with フィッシュボルト, 魚皿そしてレールパッド, 顧客の図面によると, 適用される規格とプロジェクト要件. For rail clips, 必要な材料グレードを確認できます, 熱処理, 生産前のテストと検査の要件.

図面があれば, specification or an existing clip sample, 詳細をお送りください. Our engineering team can help check the required clip material, 見積前に適用される規格および生産要件.

FAQ for Material of Rail Clips

Why is 60Si2Mn used for rail clips?

Because 60Si2Mn is a silicon-manganese spring steel with a high elastic limit and good fatigue resistance. 焼入れ焼戻し後, it stores clamping force as elastic deflection and holds it over millions of load cycles, which is what a rail clip needs.

What does 60Si2Mn mean?

It is a steel grade designation. の “60” refers to roughly 0.60% 炭素, “Si2” くらいまで 2% シリコン, そして “ん” to manganese. It is a spring steel roughly equivalent to SAE/AISI 9260.

What is the chemical composition of 60Si2Mn?

The typical composition is about 0.56 に 0.64% 炭素, 1.50 に 2.00% silicon and 0.60 に 0.90% マンガン, with limits on phosphorus and sulphur. The exact values depend on the applicable standard and quality group.

Is 60Si2Mn the only material used for rail clips?

いいえ. Other spring steels are also used, including 60Si2CrA, 38Si7 and 55Si2Mn. The choice depends on the clip design, the toe load required, the standard and the service conditions.

Is a higher-strength steel better for rail clips?

自動的ではありません. A rail clip needs elastic limit, fatigue resistance and resistance to stress relaxation together. A very high-strength steel may be more brittle or lose clamping force over time.

Why does heat treatment matter for rail clips?

熱処理, 焼き入れと焼き戻し, turns the steel composition into a spring with a uniform microstructure. Two clips with the same composition but different heat treatment will behave differently in service.

What should I ask a rail clip supplier about the material?

Ask for the grade and applicable standard, the chemical composition of the actual heat, the heat treatment specification, mechanical and hardness test results, fatigue and clamping force data, coating details and traceability.