Introduzione alla produzione dell'involucro del motore di un veicolo cingolato utilizzando il processo di fusione in sabbia di silicato di sodio

Our factory has long been dedicated to the casting production of parti ferroviarie. Tra i tanti prodotti, il guscio del motore per i veicoli cingolati è un componente critico con requisiti di qualità estremamente elevati. It is mainly used to seal the interior of the motor, protecting the coils and rotor from external dust and moisture, while precisely supporting the motor bearings to ensure smooth and high-speed operation. Oggi, we will introduce how we use the sodium silicate sand casting process to produce qualified motor end covers.

IO. Process Selection: Why Sodium Silicate Sand?

The motor end cover usually has a complex structure with internal reinforcing ribs and installation platforms, and uneven wall thickness. It needs to have sufficient strength to withstand vibration and shock during operation, and its dimensions must be precise to fit tightly with the motor housing.

After years of practice, we believe that the sodium silicate sand casting process is very suitable for producing such parts. The main reasons are as follows:

1.1 Good formability: Sabbia di silicato di sodio (mainly composed of quartz sand and sodium silicate water solution) has good fluidity after mixing, which can fill every complex corner of the mold tightly and clearly replicate the details of the mold, ensuring that every structure on the end cover is completely formed.

1.2 Alta resistenza: After the sodium silicate sand is shaped, carbon dioxide gas is blown into the sand mold to harden it rapidly within a short time. This process is called “chemical hardening”. The hardened sand mold has high strength and can withstand the erosion of molten iron without easy deformation or sand washing, laying a foundation for obtaining precisely sized castings.

1.3 High efficiency: Compared with some casting processes that require long drying times, the carbon dioxide hardening process of sodium silicate sand is very fast, usually completed within a few minutes, significantly reducing the waiting time after molding and improving production efficiency.

Few defects: This process can effectively reduce the probability of common defects such as porosity and sand inclusion in castings because there is no significant residual moisture during the sand mold hardening process, resulting in less gas generation when in contact with molten iron.

II. Processo di produzione: Step-by-step Creation of Motor End Covers

From a blueprint to a physical product, a motor end cover undergoes a series of meticulous steps.

2.1 Fare un passo 1: Mold Making and Pattern Preparation

Our skilled technicians first create a dedicated mold based on the end cover’s part drawing. Poi, they fill the mold with prepared water, glass sand and carefully tamp it down to ensure uniform density throughout the sand mold.

2.2 Fare un passo 2: Hardening and Box Assembly

Once the sand mold is complete, carbon dioxide gas is introduced into the mold through a specific nozzle. The gas reacts chemically with the water glass in the sand, forming a hard silica gel that firmly bonds the sand grains together. This process takes about one to two minutes, transforming the mold from a plastic state to a solid with sufficient strength. Afterward, the two halves of the mold (the upper and lower boxes) are precisely joined to form a complete, hollow casting mold, with the cavity representing the future shape of the end cover.

2.3 Fare un passo 3: Melting and Pouring

While the mold is being prepared, in the melting section, high-quality cast iron, scrap steel, and alloy elements are heated in a furnace to melt into molten iron with the right composition and temperature. When the molten iron reaches the desired temperature, an experienced pourer uses a ladle to steadily and continuously pour it into the assembled mold.

2.4 Fare un passo 4: Cooling and Shakeout

Dopo aver versato, the mold is transported to the cooling area, where the casting cools naturally and slowly within the sand mold. This process is crucial as slow cooling helps release internal stresses in the casting, preventing cracking and deformation. Once the casting has cooled to room temperature, workers use tools to vibrate or tap the sand mold. Due to the good collapsibility of water glass sand, most of the sand will fall off automatically, revealing the rough end cover.

2.5 Fare un passo 5: Cleaning and Finishing

The rough end cover after shakeout still requires multiple subsequent treatments. This includes cutting off the gates and risers formed during pouring using gas cutting or grinding wheels; cleaning the surface of residual sand and oxide scale through shot blasting or sandblasting; and finally, the machining workshop uses lathes, milling machines, and other equipment to precisely machine the bearing installation positions, end faces, and bolt holes, ensuring that the dimensions and surface finish of these critical parts fully meet the design drawing requirements. Only then is a finished motor end cover truly completed.

III. Controllo qualità: Safety Ensured in Every Step

3.1 Per noi, providing components for rail vehicles, quality is always the top priority.

The core advantage of using water glass sand to cast motor end covers lies in the stability of the internal quality of the castings. Due to the high strength of the mold and low gas emission, the produced end cover blanks have dense structures, low defect rates, and reliable mechanical properties.

3.2 We conduct composition tests on every batch of raw materials; perform rapid pre-furnace analysis on each batch of molten iron to ensure chemical composition compliance; and for the final products, we not only conduct full-size inspections but also regularly sample for mechanical property tests and metallographic structure analysis. We understand that only by strictly controlling every step in production can we guarantee that every motor end cover leaving our factory can operate stably under long-term and high-intensity conditions, safeguarding the safety of railway transportation.

3.3 Water glass sand casting is a mature and reliable process. It may not be the most cutting-edge technology, but its proficient mastery and strict application in the production of motor end covers for rail vehicles are sufficient proof of its value. Through solid process control and rigorous quality management, we can continuously provide customers with high-quality and durable castings. This is the foundation of our factory and a solid commitment to the railway industry.

Fornitore

Luoyang Fonyo Heavy Industries Co., Ltd,fondata nel 1998, è un produttore di pezzi fusi per ferrovie. La nostra fabbrica copre un'area di 72.600㎡, con più di 300 dipendenti, 32 tecnici, compreso 5 ingegneri senior, 11 ingegneri assistenti, E 16 tecnici. La nostra capacità produttiva è 30,000 tonnellate all'anno. Attualmente, produciamo principalmente fusione, lavorazione, e assemblaggio per locomotiva, vagone ferroviario, treni ad alta velocità, attrezzature minerarie,energia eolica,ecc.
Siamo la fornitura di componenti ferroviari a CRRC(compreso più di 20 filiali e controllate di CRRC),Macchine per l'ingegneria Gemac,Sanygroup, Industrie pesanti Citic,ecc. I nostri prodotti sono stati esportati in Russia, gli Stati Uniti, Germania, Argentina, Giappone, Francia, Sudafrica,Italia e altri paesi in tutto il mondo.